Leveling The Processor - Kodak X-Omat 5000 RA PROCESSOR Installation Instructions Manual

Leveling the PROCESSOR

Leveling the PROCESSOR from Side to Side
H148_0017GCA
H148_0017GA
Leveling the PROCESSOR from Front to Back
H148_0018GCA
H148_0018GA
5B6339 – January 1996
[1] Place a LEVEL TL-1434 as shown in the figure at
the left.
[2] Adjust the LEVELING SCREWS to level the
PROCESSOR from side to side.
LEVEL
To prevent damage to the LEVELING SCREWS and
the PROCESSOR, do not allow more than a 2.5 cm
(1 in.) clearance between the bottom of the
PROCESSOR and the HEAD of the LEVELING
SCREW.
[3] Place a LEVEL as shown in the figure below at the
left. Adjust the LEVELING SCREWS to level the
PROCESSOR from front to back.
LEVELING
SCREW
LEVEL
FLOOR
PLATE
Preparing the PROCESSOR for Installation
Caution
2.5 cm (1 in.)
HEAD
H048_0141ACA
H048_0141AC
13