Installing The Crossovers And The Squeegee Assembly - Kodak X-Omat 5000 RA PROCESSOR Installation Instructions Manual

Installing the CROSSOVERS and the SQUEEGEE ASSEMBLY

CORRECT
TO
INSTALL
H148_0037DCB
H148_0037DA
Important
To prevent water from mixing with the processing chemicals, both ends of the WATER TROUGH must be in the
notches in the SIDEPLATES.
[1] Check that the 2 WATER TROUGHS are installed correctly on the FIXER/WASH CROSSOVER and the
DEVELOPER/FIXER CROSSOVER. Both ends of the WATER TROUGH must be in the notches in the
SIDEPLATES.
5B6339 – January 1996
notch
WATER
notch
TROUGH
WATER
TROUGH
Preparing the PROCESSOR for Installation
WATER
TROUGH
notch
TO
REMOVE
17