Kodak X-Omat 5000 RA PROCESSOR Installation Instructions Manual page 7

nondrive
side
H148_0176CCA
H148_0176CA
5B6339 – January 1996
[4] Carefully move the PROCESSOR to the center of
the PALLET.
[5] Carefully tilt the PROCESSOR and PALLET
toward the drive side until the other person can
place the RAIL under the nondrive side RAIL of
the PALLET. See the figure.
[6] Continue to tilt and move the PROCESSOR to
drive
remove the PROCESSOR from the PALLET.
side
PALLET
RAILS
Preparing the PROCESSOR for Installation
7