DEEP SEA ELECTRONICS DSEControl DSEM812 Installation And Operator's Manual page 36

Parameter
IP Address
Subnet Mask
Speed
Tx Packets
Rx Packets
WiFi Information
Parameter
SSID
MAC Address
IP Address
Subnet Mask
DHCP Server
Tx Packets
Rx Packets
Connected Devices
CAN 1 & 2 Information
Parameter
Status
Bitrate
Tx Errors
Rx Errors
Tx Packets
Rx Packets
057-317 ISSUE: 1.1
Operation
Description
The IP address currently in use for this network
interface.
The Subnet Mask currently in use for this
network interface.
The current operating speed of this network
interface.
A count of transmitted network packets. Useful
for network diagnostics.
A count of received network packets. Useful for
network diagnostics.
Description
The name of the WiFi network being served by
the device.
Hardware address of the WiFi adaptor.
The IP address currently in use for this network
interface.
The Subnet Mask currently in use for this
network interface.
No: The device Dynamic Host Configuration
Protocol is not active. Devices connecting to this
WiFi server must have static IP addresses
defined.
Yes: The device Dynamic Host Configuration
Protocol is active Devices connecting to this
WiFi server must have static IP addresses are
configured automatically providing they have
DHCP enabled within their WiFi configuration.
A count of transmitted network packets. Useful
for network diagnostics.
A count of received network packets. Useful for
network diagnostics.
Shows a list of devices that are currently
connected to the WiFi server.
Description
Up: No error is detected on the CAN network.
Down: The network is detected as being in a
fault state.
Shows the bitrate (baud rate) setting of the CAN
network.
A count of transmitted packet errors. Useful for
CAN network diagnostics.
A count of received packet errors. Useful for
CAN network diagnostics.
A count of transmitted network packets. Useful
for CAN network diagnostics.
A count of received network packets. Useful for
CAN network diagnostics.
Page 36 of 50