Dodge Neon 2001 Service Manual page 21

AIRBAG
ACM ACCELEROMETER - ACTIVE —
Continued
ACM OUTPUT DRIVER 1 - STORED
When Monitored: Continuously with the ignition on.
Set Condition: The ACM has detected a diagnostic condition, replace the module.
ACM STORED ENERGY FIRING 1 - ACTIVE
When Monitored: Continuously with ignition on.
Set Condition: The ACM has detected a diagnostic condition , replace the module.
ACM STORED ENERGY FIRING 1 - STORED
When Monitored: Continuously with ignition on.
Set Condition: The ACM has detected a diagnostic condition , replace the module.
ACM STORED ENERGY LOGIC - ACTIVE
When Monitored: Continuously with the ignition on.
Set Condition: The ACM has detected a diagnostic condition, replace the module.
ACM STORED ENERGY LOGIC - STORED
When Monitored: Continuously with the ignition on.
Set Condition: The ACM has detected a diagnostic condition, replace the module.
ACM, NO PCI TRANSMISSION - ACTIVE
When Monitored: With the ignition in the On position and the ACM transmitting
information on the PCI BUS.
Set Condition: The code will set if the ACM cannot detect the ACM transmitting
information on the PCI BUS for 5 consecutive seconds. NOTE: Any PCI Bus Failure will
cause this code to set.
ACM, SAFING SENSOR - ACTIVE
When Monitored: Continuously with the ignition on.
Set Condition: The ACM has detected a diagnostic condition, replace the module.
ACM, SAFING SENSOR - STORED
When Monitored: Continuously with the ignition on.
Set Condition: The ACM has detected a diagnostic condition, replace the module.
POSSIBLE CAUSES
ACM, ACTIVE AND STORED CODE
13