VEHICLE THEFT/SECURITY
Symptom:
*PARK LAMPS FAIL TO FLASH DURING ALARM
PARK LAMP SWITCH OUTPUT CIRCUIT OPEN
REMOTE KEYLESS ENTRY MODULE
TEST
1
Ensure the park lamps are operational from the multifunction switch. If the park
lamps are inoperative, refer to the appropriate Service Information and repair the
Park Lamp circuit as necessary.
Disconnect the Remote Keyless Entry Module connector.
Connect a test light to the Park Lamp Switch Output circuit (cav 2) to ground.
Turn the Park Lamps on.
Does the test light illuminate when the Park Lamps are on?
Yes → Replace the Remote Keyless Entry Module.
→ Repair the Park Lamp Switch Output circuit for an open.
No
POSSIBLE CAUSES
ACTION
Perform VTSS VERIFICATION TEST - 1A.
Perform VTSS VERIFICATION TEST - 1A.
202
APPLICABILITY
All