Symptom:
ABS MESSAGE NOT RECEIVED
When Monitored and Set Condition:
ABS MESSAGE NOT RECEIVED
When Monitored: With the ignition in the Run/Start position.
Set Condition: The Instrument Cluster detects no PCI Bus message from the CAB
module for 12 (twelve) seconds.
ABS MESSAGE NOT RECEIVED
TEST
1
With the DRBIII , erase DTC's.
Cycle the ignition off then on.
Wait 30 seconds then with the DRBIII , read DTC's.
Does the DRBIII display ABS MESSAGE NOT RECEIVED?
Yes → Refer to the COMMUNICATION category and perform the ap-
→ Test Complete.
No
POSSIBLE CAUSES
ACTION
propriate symptom.
Perform BODY VERIFICATION TEST - VER 1.
INSTRUMENT CLUSTER
139
APPLICABILITY
All