Table of Contents
Advertisement
INSTRUMENT CLUSTER
*ALL GAUGES INOPERATIVE —
TEST
5
Turn the ignition off.
Disconnect the Instrument Cluster harness connector.
Turn the ignition on.
Measure the voltage between the Fused Ignition Switch Output circuit and ground.
Is the voltage above 10.5 volts?
Yes → Go To 6
→ Repair the Fused Ignition Switch Output circuit for an open.
No
6
Turn the ignition off.
Disconnect the Instrument Cluster harness connector.
Measure the resistance between ground and the Instrument Cluster Ground circuit.
Is the resistance below 5.0 ohms?
Yes → Replace the Instrument Cluster in accordance with the Service
→ Repair the Instrument Cluster Ground circuit for an open.
No
Continued
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Information.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
150
APPLICABILITY
All
All
Hide quick links:
Advertisement
Table of Contents
