Table of Contents
Advertisement
*BRAKE INDICATOR ALWAYS ON —
TEST
4
Turn the ignition off.
Disconnect the Park Brake Switch harness connector.
Disconnect the Instrument Cluster harness connector.
Measure the resistance between ground and the Red Brake Warning Indicator Driver
circuit.
Is the resistance below 10,000 ohms (should be infinite)?
Yes → Replace the Brake Warning Indicator circuit for a short to ground
→ Replace the Instrument Cluster in accordance with the Service
No
ACTION
(between the Park Brake Switch and the Instrument Cluster).
Perform BODY VERIFICATION TEST - VER 1.
Information.
Perform BODY VERIFICATION TEST - VER 1.
INSTRUMENT CLUSTER
Continued
153
APPLICABILITY
All
Hide quick links:
Advertisement
Table of Contents
