Power Supply Too High - Dodge Neon 2001 Service Manual

AUDIO
Symptom:

POWER SUPPLY TOO HIGH

When Monitored and Set Condition:
POWER SUPPLY TOO HIGH
When Monitored: Continuously with the ignition and Radio turned on.
Set Condition: The code will set if the radio detects voltage above 16.0 volts for 5 seconds.
POWER SUPPLY TOO HIGH
POWER SUPPLY OF RADIO
TEST
1 Turn the ignition off.
Disconnect the Radio C2 harness connector.
Start the engine.
Measure the voltage of the Fused B+ circuit.
Is the voltage above 16.0 volts?
Yes → Repair the charging system as necessary.
→ Replace the Radio.
No
POSSIBLE CAUSES
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
102
APPLICABILITY
All