Touchscreen Keys Main Menu; Submenus; Front Panel Overview - Deviser SitePROFILER User Manual

E7000L SitePROFILER
Handheld Cable/Antenna Analyzer
2-6

Touchscreen Keys Main Menu

There are six main menu keys arranged horizontally along the bottom of the touchscreen display. In Cable
& Antenna measurement mode, these keys are: Measurement, Freq/Dist, Amplitude, Calibration, Marker,
and Limit. The main menu function changes according to the instrument's active measurement mode: e.g.,
Cable Analyzer features different tools from Internal Power Meter.
The various measurement modes can be found by pressing the Menu key on the instrument's front panel
(or by touching the desktop icon located at the top of the touchscreen display). Selecting a main menu
key at the bottom of the touchscreen display will open a function-specific sub-menu.
2-7

Submenus

There are up to seven submenu keys arranged vertically along the right-hand side of the touchscreen
display. The submenu keys will change according to the main menu function selected, e.g. the Freq/Dist
main menu contains different submenu options from the Marker main menu. The active submenu will be
displayed at the top of the vertical submenu block.
2-8

Front Panel Overview

Most measurement functions will employ the touchscreen UI, while other inputs will employ the front panel
keypad located to the right of the display.
The keypad includes Menu, Save, Enter, Shift, Escape (ESC), and Up/Down/Left/Right keys, as well as a
numeric data keypad. Depending on the current mode of operation, the number keys may also serve as
dual-purpose measurement function keys.
Each of the dual-purpose keys is labeled with both a number and an alternate function, which is printed
above the key. Simply press the numerical key to access its secondary function. When prompted for a
numerical entry, the keypad will switch to entry mode.
For example, when you want to see the Limit submenu, simply press Limit (#6 on the keypad). But when you
wish to edit the Start Frequency of your measurement (in the Freq/Dist menu), tap the Start Freq softkey and
you will be prompted for a number; pressing the 6 key now will enter the number 6.
14