Transmitting Data To A Printer Or Terminal Program; Examples Of Data Transmitted (Printer, Terminal Program) - wtw pHotoFlex STD Manual

Operation
Example;
output format
ASCII
52

4.7.6 Transmitting data to a printer or terminal program

With a printer connected or a connection to a terminal program existing, you
can transmit data in the following ways:
Data
Individual data
(e.g. measured val-
ue, calibration pro-
tocol, AQS
protocol)
Stored measured
values
With the <PRT> key you output data that is being shown on the
display to the interface (displayed measured values, stored mea-
surement datsets, calibration record).

4.7.7 Examples of data transmitted (printer, terminal program)

The data are output according to the selected output format.
The ASCII output format delivers formatted datasets.
pHotoFlex Ser. no. 12345678
01.12.11 09:56:20
ID 1/ PROG 83
1.74 mg/l NH4-N [BV]
________________________________________
03.12.11 14:01:57
ID 2/ PROG 81
176 mg/l O2 [BV]
________________________________________
etc...
Operation / description
 Display the data and press <PRT>.
The data being shown on the display are transmit-
ted to the interface.
 Simultaneously with every manual storage pro-
cess.
 Display the saved data and press <PRT>.
 All datasets according to the filter criteria
(section 4.4) via the Ausgabe RS232/USB func-
tion (see section 4.6.2.).
®
pHotoFlex STD
ba75958e07 11/2020