Table of Contents
Advertisement
®
pHotoFlex
STD
If the memory is
full
ba75958e07
11/2020
4.6.1 Storing measurement datasets
Proceed as follows to transmit to the data memory and simultaneously output
to the interface a measurement dataset:
1
Press the <STO> key.
The Store display appears.
(
Store
996 free
i 01.12.2011 15:10:11
PROG 86
1.12 mg/l NH4-N
[BV]
assign ID:
Store (ID: 1:
Using < > < >, <START/ENTER> and the number keys, change
2
and confirm the ID number (ID) as necessary (0 ... 999).
3
Using <START/ENTER> or <STO>, confirm Store.
The dataset is stored. The meter switches to the measured value dis-
play.
A measurement dataset is quickly stored by twice pressing
<STO>. It is stored with the ID set last.
You can erase the entire memory (see section 4.6.5), or overwrite the oldest
dataset with the next storing procedure.
A security prompt appears before a dataset is overwritten.
)
1
Operation
45
Advertisement
Table of Contents
