Displaying Measurement Datasets; Download The Measurement Datsets To The Rs232; Interface - wtw pHotoFlex STD Manual

®
pHotoFlex STD
Representation of
a dataset
Quitting the
display
ba75958e07 11/2020

4.6.3 Displaying measurement datasets

You can read out stored datasets to the display. Only those datasets are dis-
played that correspond to the selected filter criteria (see section 4.6.2).
Start reading out the data to the display in the menu, Configuration / System
/ Measured value memory / Display.
Measured value
8: 02.12.2011 10:04:47
ID 0 / PROG 86
11.4 mg/l NH4-N
[BV] [1 + 1]
▲ ▼
i Scroll with
Further datasets that correspond to the filter criteria are displayed with the
< > < > keys.
To quit the display of stored measurement datasets, you have the following
options:
 Switch directly to the measured value display with <M> (short pressure).
 Leave the display and switch to the superordinate menu with <ESC> or
<START/ENTER>.
4.6.4 Download the measurement datsets to the RS232 interface
You can download stored datasets to the RS232 interface. Only those data-
sets are downloaded that correspond to the selected filter criteria (see
section 4.6.2).
The datasets are downloaded in the specified output format (see
section 4.7.5).
The data download to the interface is started in the menu, Configuration /
System / Measured value memory / RS232 download.
Operation
47