Configuration For The Data Transmission To A Terminal; Program - wtw pHotoFlex STD Manual

®
pHotoFlex STD
ba75958e07 11/2020
4.7.5 Configuration for the data transmission to a terminal program
Via the RS232 interface you can also transmit data to a PC with the aid of a
so-called terminal program.
When using the terminal program "HyperTerminal", you can load
the transfer data automatically with the *.ht file stored on the CD.
1 Establish the connection to a PC (see section 4.7.1).
2 Determine the output format of datasets at the pHotoFlex
section 4.7.4 E
It is selected in the menu, Configuration / System / Interface / Output
format.
Examples of the output formats (see section 4.7.6)
3 Configure the RS232 interface of the pHotoFlex
nal program.
The transmission data specified in the pHotoFlex
program have to match.
 RS232 interface (see section 4.4.3).
 Terminal (see operating manual of your terminal).
Transmission data:
Baud rate
Handshake
Parity
Data bits
Stop bits
4 Transmit data (see section 4.7.6).
Examples of transmitted data (see section 4.7.7)
STABLISHING THE CONNECTION TO A PRINTER
can be selected from: 1200, 2400, 4800, 9600,
19200
none
none
8
1
Operation
®
STD (see
®
STD and the termi-
®
STD and terminal
51