Inserting/Exchanging The Batteries - wtw pHotoFlex STD Manual

®
pHotoFlex STD
ba75958e07 11/2020

3.2.2 Inserting/exchanging the batteries

NOTE
Make sure that the poles of the batteries are positioned correctly.
The ± signs on the batteries must correspond to the ± signs in the battery
compartment.
1 Open the battery compartment:
– Unscrew the two screws (1) on the underside of the meter,
– Remove the lid of the battery compartment (2).
2 If necessary, take four old batteries out of the battery compart-
ment.
3 Insert four batteries (3) in the battery compartment.
4 Close the battery compartment and fix it with the screws.
Commissioning
1
2
13