Table of Contents
Advertisement
Operation
Display illumina-
tion with battery-
powered operation
Inserting a 28 mm
cell
16
During operation with batteries or battery pack the meter automatically
switches off the display illumination if no key is pressed for 30 seconds. The
illumination is switched on again with the next keystroke.
4.2
Inserting a cell
To be able to insert cells in the pHotoFlex
pared to take in a cell.
1
Push the dust cover (1) upward.
The cell shaft for 28 mm cells is open.
Insert a 28 mm cell (see below)
Insert a 16 mm cell (see page 17)
1
2
Insert the cell so that it is positioned on the bottom of the cell
shaft.
The cell is ready to be measured.
pHotoFlex
®
STD, the cell shaft has to be pre-
ba75958e07
®
STD
11/2020
Advertisement
Table of Contents
