Operation
Settings
28
Menu item
RS232 download
Data filter
Delete
All details on the subjects of memory and stored data is given in
section 4.6.2.
4.4.2 Display
In the Configuration / System / Display menu, you set the display features:
Switching on/off the display illumination (Illumination)
Display contrast (Contrast)
The settings are in the menu, Configuration / System / Display.
Move to the Configuration menu with the <MENU> key.
Menu item
Illumination
Setting/func-
Explanation
tion
-
Downloads to the interface all
measurement datasets that corre-
spond to the filter settings. The
download is ordered according to
the date and time.
The process can take several
minutes. To terminate the process
prematurely, press <ESC>.
see
Allows to set filter criteria in order
section 4.6.2
to display and download datasets
to the interface.
-
Erases the entire contents of the
measuring data memory, inde-
pendent of the filter settings.
Note:
All calibration data remain stored
when this action is performed.
Setting
Explanation
Auto off
The display illumination is auto-
matically switched off if no key
has been pressed for
30 seconds.
On
Switches the display illumination
on or off permanently (see
Off
section 4.5.9)
®
pHotoFlex
STD
ba75958e07
11/2020