Example Programs; Flash Programmer Utility - Analog Devices ADSP-21160 EZ-KIT Lite Manual

Example Programs

The signal locations can be found in
matic" on page
more information on configuring the
SHARC Processor Hardware Reference.
Table 1-3. Interrupt Pin Summary
1
Interrupt
IRQ0
IRQ1
IRQ2
1 are available on connector
IRQ2–0
Example Programs
Example programs are provided with the ADSP-21160 EZ-KIT Lite to
demonstrate various capabilities of the evaluation board. These programs
are installed with the EZ-KIT Lite software and can be found in the
...\211xx\Examples\ADSP-21160 EZ-KIT Lite
alDSP++ installation directory. Please refer to the readme file provided
with each example for more information.

Flash Programmer Utility

The ADSP-21160 EZ-KIT Lite evaluation system includes a Flash Pro-
grammer utility. The utility allows you to program the flash memory on
the EZ-KIT Lite. The Flash Programmer is installed with VisualDSP++.
Once the utility is installed, it is accessible from the Tools pull-down
menu.
For more information on the Flash Programmer utility, go to online Help.
1-10
www.BDTIC.com/ADI
B-1. The interrupt pins are summarized in
Connects To
SW3
SW4
SW5
.
P2
ADSP-21160 EZ-KIT Lite Evaluation System Manual
"ADSP-21160 EZ-KIT Lite Sche-
pins, see the ADSP-21160
~IRQ
Description
connect to the push buttons and supply
IRQ2–0
feedback for program execution. For instance, you
can write your code to trigger a flag when a rou-
tine is complete.
subdirectory of the Visu-
Table 1-3. For