Lifetime MAMMOTH Series Assembly Instructions Manual page 21

SECTION 3 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
3/4"
(≈19 mm)
(2)
3.3
• Slide the end of the Rim Pin (BPZ) into the Rim (ALX) and through the Eye Bolt (BQA) in the location indicated. Attach
the Rim to the Rim Housing using the hardware shown, making sure the Nylon Washers (ANK) rest between the Rim
and the Rim Housing.
!
• Only fi nger-tighten this hardware for
now. It will be securely fastened later
in the assembly.
1
BPZ
5 9/16"
ANL (x1)
BQA
ANK (x2)
ALX
2
ANK
AAX
21
AAX (x1)
ANK
ANL