Lifetime MAMMOTH Series Assembly Instructions Manual page 11

SECTION 2 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
2.1
• Slide one end of the Long Axle (GDD) through two Wheels (AMU) and one Base Frame Tube (GDG). Position the parts as
shown, with one Wheel on each side of the Base Frame Tube.
AMU
AMU
2.2
• Slide the Axle through the hole at the bottom of the Bottom Pole (ALE). Make sure the Pole is oriented as shown,
with the Pole Bracket (ALL) facing up. Next, slide two Wheels (AMU) and a Base Frame Assembly onto the Axle in the
order indicated.
!
• Make sure the Pole is oriented as shown,
with the Pole Bracket (ALL) facing up.
ALL
GDG
GDD
ALE
11
AMU
AMU