Lifetime MAMMOTH Series Assembly Instructions Manual page 13

SECTION 2 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
9/16"
(≈15 mm)
(2)
GDI (x2)
(1)
2.4
• Secure the Cross Brace (GDF) to the Base Support Tubes. Use a rubber mallet, if necessary, to tap the bolts into
place.
2.5
• Place the Base (AJM) on the Base Frame Assembly as shown.
!
• Make sure the Wheels
remain oriented as shown.
!
• Make sure the Brackets on the
Cross Brace (GDF) are angled
as shown.
AOH
GDI
GDF
13
AOH (x2)
GDI
AOH
AJM