SECTION 1 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
1.7
• After the poles have been seated, insert two Self-Drilling Screws (ABZ) into the back of the pole as shown. These screws are designed
to drill through the metal of the underlying pole section.
ALE
ABZ (x4)
ALF
ABZ (x2)
8
ALH
ABZ (x2)
!
• For ease of installation, chuck the
Self-Drilling Screws directly into
the drill (see Figure 1, not available
on all drills), or use a 3/8" Hex
Driver (see Figure 2, Hex Driver not
included).
Figure 1
Figure 2