Lifetime MAMMOTH Series Assembly Instructions Manual page 23

SECTION 3 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
9/16"
(≈15 mm)
(1)
3.6
• Slide the Compression Spring (BGZ) onto the Eye Bolt (BQA), and secure with the hardware shown. Tighten the 3/8" Zinc
Nuts (ANN) to adjust the rim tension.
3.7
• Securely tighten the hardware from steps 3.3 and 3.5 in the order they were assembled.
BGZ (x1)
3/4"
(≈19 mm)
3.3
(2)
1/2"
(≈13 mm)
3.5
(1)
ANN (x2)
BQA
BGZ
ANO
ANN
ANN
23
ANO (x1)*
!
• Washer (ANO) is found
in the Rim Kit.
!
• Washer (ANO) is found
in the Rim Kit.