Lifetime MAMMOTH Series Assembly Instructions Manual page 40

SECTION 5 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
3/16"
(≈5 mm)
(2)
(1)
5.8
• Secure one Bolt (GDN) and Washer (GDO) to a Coupler Pin (GDX) at one end.
5.9
• Slide the Coupler Pin Assembly through the Lifter Arms and the Gas Spring, adding Plastic Spacers (ACZ) in the
locations shown. Secure the Pin Assembly with the hardware indicated.
GDX
GDX (x1)
GDN (x2)
GDN
GDO
ACZ
GDO (x2)
GDX
ACZ
36
ACZ (x2)
GDO
!
• Fit this Washer (GDO) over
the Bolt (GDN) to secure the
hardware to the Coupler Pin.
GDN