SECTION 3 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
1/2"
(≈13 mm)
(2)
3.1
• Lay the Backboard (AJI) face up with the Rim holes exposed over the edge of a table. Place the Rim Impact
Spacer (BGY) in the Backboard. Add the Left and Right Rim Housings (AMC & AMB) on top of the Rim Impact
Spacer and slide the hardware shown into place.
!
• Only fi nger-tighten this hardware for
now. It will be securely fastened later
in the assembly.
AJI
ANJ (x2)
ANJ
ABD
AMC
BGY
ABK
ABD (x2)
ANJ
ABD
AMB
The Glass Backboard will break if the Rim Spacer
is not installed as shown in this step. This may
result in personal injury or property damage.
ABK
19
ABK (x2)
WARNING