Barco OVERVIEW D 50" Installation Manual page 90

1
0,9
0,8
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
1400 1600
Only dimmer positions between (approx.) 1600 (minimum brightness) and (approx.)
2600 (maximum brightness) can be addressed.
The dimmer wheel can be enabled or disabled by means of the menu
Service | Color/Brightnes |Optical Dimmer.
If Optical Dimmer is selected, a dialog box pops up where the current status is indicated and where this status
can be changed:
The correct setting is Enabled!
Disabled should only be selected in case the dimmer is defective (stuck)!
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
1800 2000 2200
dimmer position [ steps ]
September 2006 ________________________________
September 2006 September 2006
8. Final Adjustment and Configuration
2400 2600
intensity of emitted light depends on the position of the dimmer wheel
Dialog Box to enable/disable the optical dimmer
________________________________________________________
________________________________ ________________________________
2800 3000
Figure 8-29
Figure 8-30
________________________ 8-22
________________________ ________________________