•
Screw the supporting frames together (size 10 socket spanner and size 5 hex key).
•
Be sure that the 2 frames are exactly adjusted (check area).
In order to assemble a polygonal arrangement, proceed as follows:
•
Concerning the feet adjustment of the supporting frames proceed as mentioned above.
•
Screw the supporting frames together using the polygonal kit (see Figure 2-3). Don't tighten the securing
screws.
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
O.K.
Check area
Frame 1
September 2006 ________________________________
September 2006
September 2006
Check area
Frame 2
position of securing screws and check area
_________________________________________________________
________________________________
________________________________
2. Set up of OverView mD
Figure 2-2
Figure 2-3
polygonal installation front view
_________________________ 2-3
_________________________
_________________________