Barco OVERVIEW D 50" Installation Manual page 38

Linear version
The length of the profile is project specific and defined by the distance between the rear
side of the display wall and the wall of the building!
The attachment of the profile on the wall of the building allows to be positioned between
30degrees and 60degrees off the straight connection thus also eliminating unevenness of
the wall.
The following pictures show a sketch of the installed wall fixation on the display wall:
Item no. quantities
7 1
9 1
4 1
5 2
1 2
8 1
10 1
11 1
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
Description
Profile (length: project specific)
Screw M10x110
Fixation bracket display wall side
Washer U-6-125
Screw M6x40
Distance bushing
Nut M10
Washer U-10-125
September 2006 ________________________________ _________________________________________________________
________________________________ ________________________________
September 2006 September 2006
5. Wall fixation
Figure 5-2
wall fixation, linear version
_________________________ 5-1
_________________________ _________________________