Barco OVERVIEW D 50" Installation Manual page 10

•
Insert the two lower panels.
The panels must be tightened by securing screws and joined by rivets (see Figure 1-6).
•
Install both top profiles PU II 3. One of these profiles is equipped with 3 more counter nuts than the other.
This profile must be installed at the front of the support frame between the profiles
PU I I and PU I 2.
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006 ________________________________ _________________________________________________________
________________________________ ________________________________
September 2006 September 2006
1. Assembly of support frame
Figure 1-6
Figure 1-7
_________________________ 1-5
_________________________ _________________________