•
Use the polygonal template to align the two dark boxes. The two profiles (A + B) must fit exactly together
with the template (polygonal arrangement).
•
Insert profile connectors into the corner profiles of each dark box of the first row and tighten securing screws
(size 6 hexagon key).
•
Place the dark boxes of the second row onto the profile connectors of the dark boxes at the first row.
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006 ________________________________
_________________________________________________________
________________________________
________________________________
September 2006
September 2006
2. Set up of OverView mD
Polygonal installation of dark boxes rear view
polygonal alignment of dark boxes
_________________________ 2-6
_________________________
_________________________
Figure 2-8
Figure 2-9