Table of Contents
Advertisement
8.5.13.4 Runtime Warning
In this menu the limit for a Lamp Runtime Warning can be set in the range 0 hours to 15000 hours. Default
value is 6000 hours (nominal operation time of the 120W UHP lamps).
•
Move the cursor key to Runtime Warning
•
Press Enter to select.
A dialog pops up where the current lamp runtime is indicated.
After the specified runtime time a warning message will appear on the screen.
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006 ________________________________
________________________________________________________
________________________________
________________________________
September 2006
September 2006
8. Final Adjustment and Configuration
Service|Lamps|Runtime Warning
Lamp Runtime Warning set to 6000 hours
Lamp Runtime Warning
________________________ 8-40
________________________
________________________
Figure 8-59
Figure 8-60
Figure 8-61
Advertisement
Table of Contents
