Barco OVERVIEW D 50" Installation Manual page 19

•
Unpack the dark boxes.
•
Remove the two covers from the backside of each dark box.
•
Place the dark boxes of the first row onto the profile connectors of the supporting frame.
•
Screw the dark boxes together through the holes in vertical profiles (only linear arrangement)
•
Screw the dark boxes together using the polygonal connector kit (polygonal arrangement).
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
Profile connector
Securing screw
Supporting frame
Dark box
Supporting frame
September 2006 ________________________________ _________________________________________________________
________________________________ ________________________________
September 2006 September 2006
2. Set up of OverView mD
profile connectors
Installing dark box onto the supporting frame
_________________________ 2-5
_________________________ _________________________
Figure 2-6
Figure 2-7