Setup Options - Password Protected
•
The machine settings screen enables the supervisor to change the operating parameters for
DWELL, LOW TEMP, CHEMICAL, and DELIME.
•
The Dwell setting sets the
time the rack pauses in the
wash zone for heavily soiled
wares.
•
The Chemical Setup determines the operation of the factory on-board chemical
system for detergent and rinse-aid (if equipped). The values are factory set. NO
indicates there is not an on-board system installed. YES means the system is
installed. The detergent and rinse-aid pumps can be primed from this screen.
Supervisor Mode
(continued)
•
When ON, the Low Temp
Setpoint is the wash temp-
erature that must reach
before the machine will run.
The factory default is OFF.
Detergent
Rinse-aid
33