Supervisor Mode
Setup Options - Password Protected
•
The DELIME button sets the parameters for the deliming system
•
A manual delime may be performed from this screen (see page 20).
•
Press DELIME SETUP to access the delime operating parameters.
•
Automatic deliming is enabled when the DELIME is ON.
•
HOURS sets the time interval between the 'DELIME REQUIRED" prompt.
•
The DELIME WASH value sets the number of times the machine will perform wash cycles
during the delime cycle.
•
The DELIME RINSE value sets the number of times the machine will perform rinse cycles
during the delime cycle.
•
Pressing DELIME START begins a delime operation .
34
(continued)