Maintenance; Schedules - Champion 64 PRO Series Operation, Cleaning And Maintenance Manual

MAINTENANCE

Schedules

Weekly
1. Inspect all water lines for leaks and tighten joints if required.
2. Clean any detergent residue from the exterior of the machine.
3. Clean any accumulated scale from the heating element.
4. Inspect the spray arms for damage or missing parts.
5. Inspect the final rinse arm nozzles and clean with a wire if required.
6. Inspect the pawl bar and drive assembly for damage or missing parts.
7. Check that float switches move freely.
8. Check the idle pump actuator and the final rinse actuator move freely.
9. Remove and clean the pump suction strainer.
Monthly
1. Inspect interior of machine for lime deposits and clean. Delime if desired.
2. Check o-rings on spray arm piping connections.
3. Clean any accumulated scale from the heating element.
4. Inspect the spray arms o-rings and ensure all plugs are installed.
5. Inspect the final rinse arms for missing o-rings.
6. Inspect the pawl bar and drive assembly for damage or missing parts.
7. Check that float switches move freely.
8. Check the idle pump actuator and the final rinse actuator move freely.
9. Check the condition of Touchscreen display and pressure gauge.
10. Perform complete operation check.
Yearly
1. Contact authorized service agent to perform complete maintenance
review of machine.
2. Correct any abnormal situations as recommended.
Maintenance
25