Dräger Oxylog 3000 plus Instructions For Use Manual page 143

Inspiratory and expiratory resistance of
the device with pediatric breathing circuit
Nominal flow
Dead space including flow sensor, but
excluding accessories such as filter, HMEs
and CO cuvette
2
Dead space of the
CO cuvette
2
Supplementary functions
Patient connection
1) At a supply pressure >350 kPa.
The maximum inspiratory flow is reduced to 80 L/min at a supply pressure of <350 kPa, and to 39 L/min at a supply pres-
sure of <280 kPa.
2) When using an accessory with a female connector, add 2 mL to the breathing circuit dead space.
Instructions for use Oxylog 3000 plus SW 1.n
Disposable breathing
circuit for adults,
1.5 m
Disposable breathing
circuit for adults,
3.0 m
Reusable breathing
circuit for adults,
1.5 m
Reusable breathing
circuit for adults,
3.0 m
Disposable breathing
circuit for pediatric
patients
Demand valve
Relief valve
<5 mbar at 30 L/min
<2 mbar at 5 L/min
Inspiratory 21 L/min at 2 mbar
Expiratory 10 L/min at 2 mbar
Inspiratory 20 L/min at 2 mbar
Expiratory 10 L/min at 2 mbar
Inspiratory 22 L/min at 2 mbar
Expiratory 16 L/min at 2 mbar
Inspiratory 21 L/min at 2 mbar
Expiratory 15 L/min at 2 mbar
Inspiratory 12 L/min at 2 mbar
Expiratory 7 L/min at 2 mbar
2)
Approx. 35 mL
(reusable breathing circuit for adults).
2)
Approx. 30 mL
(disposable breathing circuit for adults).
2)
Approx. 15 mL
(disposable breathing circuit for pediatric patients).
Approx. 4 mL (CO cuvette)
2
Approx. 1.5 mL (CO cuvette for pediatric patients)
2
Opens the breathing system upon failure of the gas
supply, permits spontaneous breathing with ambient
air.
Opens the breathing system in case of a device mal-
function to approximately 80 mbar.
22 mm ISO conical connector
Technical data
143