Measuring The Dimension Of The Rear Wheel Unloaded; Checking The Static Sag Of The Shock Absorber - GAS GAS MC50 2021 Owner's Manual

10.7

Measuring the dimension of the rear wheel unloaded

10.8

Checking the static sag of the shock absorber

Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Measure the vertical distance between the rear axle and a fixed
point, such as a marking on the side cover.
–
Note the value as dimension
400988-10
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Measure dimension
–
Hold the motorcycle upright with aid of an assistant.
–
Measure the distance between rear axle and fixed point again.
–
Note the value as dimension
Info
The static sag is the difference between measurements
B
and
–
Check the static sag.
Static sag
» If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber.
( p. 30)
400989-10
TUNING THE CHASSIS 10
p. 37)
A
.
A
of rear wheel unloaded. (
B
.
.
12 mm (0.47 in)
p. 37)
p. 29)
A
29