Removing The Shock Absorber; Installing The Shock Absorber - GAS GAS MC50 2021 Owner's Manual

11.20

Removing the shock absorber

11.21

Installing the shock absorber

Warning
Danger of accidents Modifications to the suspension setting may seriously alter the handling characteristic.
–
Ride slowly to start with after making adjustments to get the feel of the new handling characteristic.
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
1
Pull brake line
–
2
Remove nut
–
3
Remove screw
F02985-10
–
4
Remove screw
remove the shock absorber.
F02986-10
Main work
–
Push splash protector
–
Position the shock absorber with screw
desired seating height.
F02986-11
–
Raise the link fork, mount and tighten the shock absorber with
3
screw .
Guideline
Screw, bottom
shock absorber
–
4
Mount nut
Guideline
Screw, top shock
F02985-11
absorber
–
Attach brake line
SERVICE WORK ON THE CHASSIS 11
p. 37)
out of the holder.
.
and lower the link fork carefully.
5
, push splash protector to the side, and
1
to the side.
2
, depending on the
M10 45 Nm (33.2 lbf ft)
and tighten the fitting.
M10 45 Nm (33.2 lbf ft)
5
to the holder.
Loctite ® 243™
®
Loctite 243™
49