10.17
Adjusting the seat height
Warning
Danger of accidents Modifications to the suspension setting may seriously alter the handling characteristic.
–
Make sure your child rides slowly to start with after making adjustments in order that he or she can assess the
new handling characteristic.
–
Remove screws
handlebar and lay it to one side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove screws
–
Place handlebar supports in required position. Mount and tighten
2
C00249-10
screws
.
Guideline
Screw, handlebar
support
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamps. Mount screws
evenly.
Guideline
Screw, handlebar
clamp
Info
Make sure the installed gaps are even.
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
1
Remove nut
F02973-10
TUNING THE CHASSIS 10
1
. Take off the handlebar clamps. Remove the
2
. Take off handlebar supports.
M10
40 Nm (29.5 lbf ft)
1
M8
20 Nm (14.8 lbf ft)
p. 37)
.
Loctite
®
243™
and tighten
35