Removing The Clutch Cover; Adjusting The Clutch - GAS GAS MC50 2021 Owner's Manual

15.6

Removing the clutch cover

Note
Environmental hazard Improper handling of fuel is a danger to the environment.
–
Do not allow fuel to enter the groundwater, the soil, or the sewage system.
Info
Fuel can emerge via the carburetor.
Capture emerging fuel using a suitable container.
15.7

Adjusting the clutch

–
Turn the knurled screw on the fuel tap all the way clockwise.
–
Lay the vehicle down on its left side.
–
Remove screws
–
Remove clutch cover
F03032-10
Preparatory work
–
Remove the clutch cover.
Main work
–
Turn clutch basket
ble.
F03033-10
Condition
If there is no reference point:
–
Turn adjusting screws
detectable click.
–
Turn adjusting screws
ting.
Guideline
Basic setting of slip speed
F03033-11
Info
The springs may not be pretensioned by more than 17
clicks from the stop using the adjusting screws.
Condition
If the slip speed is too low:
TUNING THE ENGINE 15
1
.
2
with the seal ring.
( p. 89)
1 2
until adjusting screws
2
counterclockwise to the last
2
clockwise by 9 clicks to the basic set-
8,700 ... 9,300 rpm
become accessi-
89