Table of Contents
Advertisement
AdBlue® fault:
When the [AdBlue fault] warning appears, the Ad-
Blue® warning light
and/or Malfunction Indica-
tor Light (MIL)
may also illuminate depending
on conditions.
[AdBlue fault] warnings can also be seen in the [Ad-
Blue Status] option of the [Settings] > [Maintenance]
menu. See "Settings" in the "2. Instruments and
controls" section.
Condition A
This warning appears and a chime will sound if there
is a malfunction in the AdBlue® SCR system. The
message will be displayed each time the engine
starts when there is estimated to be between 850
and 800 km (530 and 500 miles) left before inspect-
ing and/or repairing the AdBlue® SCR system. The
message can be cleared from the display until the
next time the engine is started, when it will reap-
pear without a chime sounding and will remain dis-
played for 6 seconds.
Have the system checked by an approved dealer or
qualified workshop as soon as possible.
NIC3841
Condition B
This warning provides you with an estimation of the
distance (0 to 800 km (0 to 500 miles)) that can be
driven before inspecting and/or repairing the Ad-
Blue® SCR system. This message can be cleared
from the display until the engine is restarted, when
it will reappear. The warning will also appear at 100
km (62 miles) (or 50 km (31 miles) after 200 km (124
miles)) intervals following the initial warning (700/
600/500/400/300/200/150/100/50
Starting and driving
NIC3537
km)
(435/
195
Advertisement
Table of Contents
