Table of Contents
Advertisement
Child restraint installation using the vehicle's seat belt
The following restriction is applied when using child restraints varying by infants weight and installation position.
Mass group
0
<10 kg
0+
<13 kg
I
9 - 18 kg
II
15 - 25 kg
III
22 - 36 kg
U:
Suitable for "Universal" category child restraint systems, forward and rearward facing, approved for use in this mass group.
UF:
Suitable for "Universal" category child restraint systems, forward facing only, approved for use in this mass group.
L:
Suitable for particular child restraint systems of the "Specific for the vehicle", "Restricted", or "Semi-universal" categories, approved for use in this mass group.
X:
Seat position not suitable for children in this mass group.
*1:
Move the head restraint to the uppermost position or, if necessary, remove it in case of any interference with the child restraint. Do not remove head restraint
when using a booster cushion only.
*2:
Adjust the front seat(s) slide position sufficiently forward and/or the seat height adjustment (if available) to the uppermost position to ensure there is no
contact between child seat and back of front seat.
*3:
Move the front passenger seat as far rearward as possible.
*4:
Suitable only for "Universal" category of child restraints. Do not install child restraints with support leg.
Front passenger seat
Front passenger seat
(Air bag ON)
X
X
X
X
X
Seating position
Second row outer seat
(Air bag OFF)
L*3
L*3
L*1,*3
L*1,*3
L*1,*3
Safety — seats, seat belts and supplemental restraint system
Second row centre seat *4
U/L*2
U/L*2
U/L*1,*2
U*1,*2
U/L*1,*2
U*1,*2
U/L*1,*2
U*1,*2
U*2
U*2
29
Advertisement
Table of Contents
