Renault ALASKAN 2020 Vehicle User Manual page 41

Table of Contents

Advertisement

i-Size ISOFIX cover unzipped
To access an ISOFIX anchor point unzip the cover.
CAUTION
Always close the zips when not in use to avoid
objects falling into the ISOFIX cavity.
ISOFIX child restraint anchor
attachments
Anchor attachment
ISOFIX and i-Size child restraints include two rigid
attachments that can be connected to two anchors
located in the seat. With this system, you do not
have to use a vehicle seat belt to secure the child
restraint. Check your child restraint for a label stat-
ing that it is compatible with the ISOFIX or i-Size
child restraints. This information may also be in the
instructions provided by the child restraint manu-
facturer.
ISOFIX and i-Size child restraints generally require
the use of a top tether strap or other anti-rotation
NPA1538
devices such as support legs. When installing ISOFIX
or i-Size child restraints, carefully read and follow
the instructions in this manual and those supplied
with the child restraints. (See "Child restraint an-
chorage (where fitted)" later in this section.)
CHILD RESTRAINT ANCHORAGE
(where fitted)
Your vehicle is designed to accommodate a child
restraint system on the rear seat. When installing a
child restraint system, carefully read and follow the
instructions in this manual and those supplied with
the child restraint system.
Child restraint anchorages are designed to with-
stand only those loads imposed by correctly fit-
ted child restraints. Under no circumstances are
they to be used for adult seat belts, harnesses or
for attaching other items or equipment to the ve-
hicle. Doing so could damage the child restraint
SSS0644Z
anchorages. The child restraint will not be prop-
WARNING
Safety — seats, seat belts and supplemental restraint system
erly installed using the damaged anchorage, and
a child could be seriously injured or killed in a
collision.
ISOFIX Top Tether anchor location
The anchor point is a strap loop located on the top
of the second row centre seatback
two similar straps at the back of the 2nd row outer
seats that are intended only as guide loops
If the child restraint manufacturer recommends
that the top tether strap be attached, attach and
tighten the top tether strap to the top tether an-
chor (loop). Refer to the child restraint instructions
and the following steps.
NIC2805
. There are
.
33

Advertisement

Table of Contents
loading

Table of Contents