Table of Contents
Advertisement
•
The in-vehicle antenna for Bluetooth® commu-
nication is built in the system. Do not place the
Bluetooth® audio device in an area surrounded
by metal, far away from the system or in a nar-
row space where the device closely contacts the
body or the seat. Otherwise, sound degradation
or connection interference may occur.
•
While a Bluetooth® audio device is connected
through the Bluetooth® wireless connection, the
battery power of the device may discharge
quicker than usual.
•
This system is compatible with the Bluetooth®
AV profile (A2DP and AVRCP).
Bluetooth® is a trademark
owned by Bluetooth SIG, Inc.,
and licensed to Visteon Corpo-
m
ration
and
GmbH.
Compact Disc (CD)/USB device with
MP3/WMA/AAC (where fitted)
Terms:
•
MP3 — MP3 is short for Moving Pictures Experts
Group Audio Layer 3. MP3 is the most well known
compressed digital audio file format. This format
allows for near "CD quality" sound, but at a frac-
tion of the size of normal audio files. MP3 con-
version of an audio track from CD can reduce
the file size by approximately 10:1 ratio (Sampling:
44.1 kHz, Bit rate: 128 kbps) with virtually no per-
ceptible loss in quality. MP3 compression
removes the redundant and irrelevant parts of a
sound signal that the human ear doesn't hear.
148
Display screen, heater and air conditioner, and audio system
•
WMA — Windows Media Audio (WMA) is a com-
pressed audio format created by Microsoft as
an alternative to MP3. The WMA codec offers
greater file compression than the MP3 codec,
enabling storage of more digital audio tracks in
the same amount of space when compared to
MP3s at the same level of quality.
•
AAC (where fitted) — Advanced Audio Coding
(AAC) is a compressed audio format. AAC offers
greater file compression than MP3 and enables
music file creation and storage at the same qual-
ity as MP3.
•
Bit rate — Bit rate denotes the number of bits
per second used by a digital music files. The size
and quality of a compressed digital audio file is
determined by the bit rate used when encoding
the file.
Robert
Bosch
•
Sampling frequency — Sampling frequency is the
rate at which the samples of a signal are con-
verted from analog to digital (A/D conversion)
per second.
•
Multisession — Multisession is one of the meth-
ods for writing data to media. Writing data once
to the media is called a single session, and writ-
ing more than once is called a multisession.
•
ID3/WMA Tag — The ID3/WMA tag is the part of
the encoded MP3 or WMA file that contains in-
formation about the digital music file such as
song title, artist, album title, encoding bit rate,
track time duration, etc. ID3 tag information is
displayed on the Album/Artist/Track title line on
the display.
*
Windows® and Windows Media® are registered
trademarks and/or trademarks of Microsoft
Corporation in the United States of America
and/or other countries.
Advertisement
Table of Contents
