Table of Contents
Advertisement
4WD mode switch
Wheels driven
<2WD>
Rear wheels
Four wheels
<4H>
Neutral
<4LO>
Four wheels
*:
When the <4LO> position is selected, the ESP
system is disabled and the ESP off indicator
light illuminates. See "Warning lights, indicator
lights and audible reminders" in the "2. Instru-
ments and controls" section.
Indicator
4WD mode
<4LO>
-
m
-
m
Blinking
m
Stays on*
m
Operation of 4WD mode switch
Use conditions
(See "4WD mode switch operation" later in this
Shifting between the <2WD> and <4H> drive
For driving on dry,
modes can be done while driving.
paved roads.
The indicator will change when the drive mode is
changed.
For driving on rough,
Shifting between the <2WD> and <4H> modes
sandy or snow-
must be performed at a speed below 100 km/h
covered roads.
(60 MPH).
Shifting between the <4H> and <4LO> drive
The 4LO indicator
modes:
blinks when shifting
•
Stop the vehicle, depress the, clutch pedal (MT
between <4H> and
models) and the, brake pedal and shift the shift
<4LO>.
lever to the N (Neutral) position.
For use when
•
Depress and turn the 4WD mode switch. The
maximum power
4WD mode switch will not shift between <4H>
and traction are
and <4LO> if the transmission is not in the N
required at low
(Neutral) position or the vehicle is moving.
•
speeds (for example,
Wait for the 4LO indicator to stop blinking and
on steep grades or
stay on or off before shifting your transmission
rocky, sandy, muddy
into gear or releasing the clutch pedal (MT
roads).
models).
section.)
213
Starting and driving
Advertisement
Table of Contents
