Table of Contents
Advertisement
The fuel filler cap is a screw-on ratcheting type. Af-
ter refuelling, tighten the cap clockwise until more
than 2 ratcheting clicks are heard. The fuel filler cap
locks automatically when it is tightened.
114
Pre-driving checks and adjustments
AdBlue® FILLER LID AND CAP
➀
The AdBlue® filler lid
is located on the right hand
side of the vehicle.
OPENING AdBlue® FILLER LID
To open the AdBlue® filler lid, push the AdBlue® filler
lid slightly and release.
To close the AdBlue® filler lid, close the lid until it
securely locks in place.
LOCKING AdBlue® FILLER LID
The AdBlue® filler lid is locked and unlocked using
the Keyless Entry System, see "Remote Control Key
system (where fitted)" earlier in this section for ad-
ditional details.
AdBlue® FILLER CAP
NDI1684
The AdBlue® filler cap is a non-ratcheting type. Turn
➀
the cap anticlockwise
➁
clockwise
until tight.
CAUTION
If AdBlue® is spilled on the vehicle body, flush it
away with water to avoid paint damage.
NDI1646
NDI1647
to remove. Tighten the cap
Advertisement
Table of Contents
