Table of Contents
Advertisement
•
Six stations (if available) can be set for the AM
band.
If the battery is disconnected, or if the fuse blows,
the radio memory will be erased. In that case, reset
the desired stations after battery connection or
fuse replacement.
DAB and Radio Data System (RDS)
operation (where fitted)
The RDS is a system through which encoded digital
information is transmitted by FM radio stations in
addition to the normal FM radio broadcasting. The
RDS provides information services such as station
name, traffic information, or news.
DAB (Digital Audio Broadcast)
NOTE
•
When in DR mode operation is similar to FM
mode but may slightly differ.
•
In some countries or regions, some of these
services may not be available.
Alternative Frequency (AF) mode:
The AF mode operates in the FM (radio) mode.
•
The AF mode operates in the FM (radio), AUX or
CD mode (if FM was previously selected in the
radio mode).
•
The AF function compares signal strengths and
selects the station with the optimum reception
conditions for the currently tuned-in station.
168
Display screen, heater and air conditioner, and audio system
DAB and RDS functions
Programme Service (PS) function (station name
display function):
–
FM:
When an RDS station is tuned in with seek or
manual tuning, the RDS data is received and the
PS name is displayed.
–
DR:
When a station is tuned in with seek or manual
tuning, the data is received and the PS name is
displayed.
TA Traffic announcement
This function operates in FM/DR (Radio) mode. This
function will still operate in the background if any
media source is selected (CD, USB or MEDIA mode).
•
Pressing the <TA> button selects the TA mode.
The TA indicator is displayed while TA mode is
on.
•
When <TA> is pressed again. The mode will be
switched off and the TA indicator will disappear
from the display.
Traffic announcement interrupt function:
When a traffic announcement is received, the an-
nouncement is tuned in and the display shows a
notification message with the radio station name
e.g. [TA: Radio 1].
Once the traffic announcement has finished, the
unit returns to the source that was active before
the traffic announcement started.
If <TA> is pressed during a traffic announcement,
the traffic announcement interrupt mode is can-
celled. The TA mode returns to the standby mode
and the audio unit returns to the previous source.
SETUP BUTTON
To configure [Audio], [Clock], [Radio], and [Language]
settings, perform the following procedure:
1. Press the <SETUP> button.
2. Turn the <MENU> dial clockwise or anticlockwise,
the display will appear in the following order:
[Audio]
[Clock]
[Radio]
[Language]
After the desired levels have been set, press either
the
(Back) button repeatedly, or the <SETUP>
button.
Audio adjustments
1. Press the <SETUP> button to enter the setup
menu screen then select [Audio].
2. Turn the <MENU> dial clockwise or anticlockwise,
the display will appear in the following order:
[Sound]
[AUX in]
[Speed Volume]
Boost]
[Audio Default]
[Bass
Advertisement
Table of Contents
