Front-facing: Step 2
2. Route the seat belt tongue through the child re-
straint and insert it into the buckle
hear and feel the latch engage.
3. To prevent slack in the seat belt webbing, it is
necessary to secure the seat belt in place with
locking devices attached to the child restraint.
Front-facing: Step 4
4. Remove any additional slack from the seat belt;
press downward
centre of the child restraint with your knee to
compress the vehicle seat cushion and seatback
while pulling up on the seat belt.
SSS0493AZ
➁
until you
Front-facing: Step 5
5. Test the child restraint before you place the child
➄
in it
. Push the child restraint from side to side
and tug it forward to make sure that it is held
securely in place.
6. Check to make sure that the child restraint is
properly secured prior to each use. If the child
restraint is loose, repeat steps 3 through 5.
SSS0647AZ
➂
➃
and rearward
firmly in the
SSS0638AZ
Safety — seats, seat belts and supplemental restraint system
Rear-facing child restraint:
Be sure to follow the manufacturer's instructions
for the proper use of your child restraint. Follow
these steps to install a rear-facing child restraint on
the rear seats using three-point type seat belt with-
out automatic locking mode:
Rear-facing: Step 1
1. Position the child restraint on the seat
Rear-facing: Step 2
2. Route the seat belt tongue through the child re-
straint and insert it into the buckle
hear and feel the latch engage.
SSS0759AZ
➀
.
SSS0654AZ
➁
until you
37