Boiler Regulation; Technical Parameters - ATTACK PELLET 30 AUTOMATIC PLUS Instructions For Use Manual

BOILER REGULATION

The ATTACK PELLET 30 AUTOMATIC Plus boiler for pellet combustion is regulated by
touch screen on the upper covering.
Operation, parameters and settings of burner are described in the appendix of this
manual.

TECHNICAL PARAMETERS

Boiler type
Boiler output
Output range
Heat exchange area
Prescribed chimney draught
Max. operating water overpressure
Pressure loss of water
Boiler weight
Flue diameter
Boiler height
Boiler width
Boiler depth
Dimensions of pellet tank (500 l)
Protection of el. parts
Max.el.input (by ignition)
Operating el. input
Boiler efficiency
Boiler class by CO emission (under EN 303-5)
Flue temperature by nominal output
Prescribed fuel
Average consumption
Volume of water in boiler
Range for setting of heat. water temperature
Connection voltage
Mass flow of flue gases at nominal output
Mass flow of flue gases at minimal output
Prescribed temperature of boiler return water within operation is 65°C. Recommended
operating temperature of water in boiler is 80°C.
PELLET 30 AUTOMATIC Plus
kW 30
kW 12–30 kW
2
m 1,9
Pa 15–20
kPa 250
Pa
152(ΔT=10K); 38 (ΔT=20K)
kg 355
mm 150
mm 1204
mm 550
mm 1 234
mm 720×1240×830
IP IP40
W 600
W 90
% 90,6
5
°C 143
Drevné pelety ∅6 mm, l=35 mm max.
-1
kg.h 2,4–6,9
l 62
°C 50–80
V/Hz 230/50
kg/s 0,015
kg/s 0,005
5